Goods Platforms
Options
- The largest goods lift is the Goodsmaster. This is available in a variety of sizes and is able to carry loads ranging from 500kg to 1500kg.
- The goods lift is typically located ‘back of house’ and used to transport large trolleys or pallets.
- Large retail stores, warehouses or factories and industrial premises have need of the Goodsmaster.
- Goods platforms are available for most sizes up to 3000kg and six storeys.
- These lifts are non passenger carrying, goods use only.
Technical Specifications
- Load: Up to 300Kg
- Cage: Constructed from steel sheeting finished in grey baked enamel
- Entrances: All doors are electrically interlocked to comply with safety regulations
- Car Entrance Protection: We recommend that car entrances should be protected to prevent goods falling from the lift car during travel. A collapsible picket gate can be fitted and is offered as an optional extra
- Mounting: Self supporting with a freestanding structure. Because our structure incorporates the whole equipment (e.g. winding unit, shutters etc.), we do not require a load-bearing lift well or separate motor room.
- Floors Served: Can serve up to six floors
- Speed: 250kg - 0.17m/s. 300kg - 2 speed, 0.31m/s maximum
- Control: Fully automatic push button control with call and despatch facilities at each entrance, incorporating Landing Position and “Lift in Use” indicators
- Operation: Smooth and quiet. A highly efficient winding unit is supplied with a well-developed reliable controller. Electrical consumption is minimal because the Goods Lift is fitted with a balance weight and 2:1 roping
- Winding Unit: Mounted at the top of the lift on our frame within the headroom dimensions given. The motor drives through a high quality reduction gear, fitted with a disc brake. A hand wheel and brake release are incorporated
- Electric Supply: 415 volt, 50 cycles, 3 phase. Client to provide 15 amp isolator at floor served
- Enclosure: Normally by builder
- Maintenance: We normally recommend the Goods Lift is serviced and inspected by a qualified Swallow Lift engineer every quarter. This is to ensure safe, efficient and reliable operation